TEROCA multiparameter unit

A continuous measuring unit for up to 14 parameters, with early warnings and a built-in web server: an IoT node that combines measurement, control, data logging and communication in a single device. Simply open your phone, tablet or computer to view the data and interact with the unit, with no need to travel.

Four devices in one

TEROCA integrates the measuring system, the controller, the data logger and the web server. It measures up to 14 parameters at once, acts on the measurements and stores measurements, events and alarms, which can be viewed on its own web server or on the client's platform.

Measurement parameters

• 2 flow rates
• 2 levels
• 2 conductivities (0 to 5 mS/cm)
• 2 temperatures
• 1 pH
• 1 redox
• 4 inputs of 4-20 mA, for example: chlorine, bromine, ozone, turbidity, oxygen, high conductivity (up to 500 mS/cm) or low conductivity (0 to 10 µS/cm), pH, redox, ISE, flow rate and pressure.

Grows with your installation

You can start with one or several parameters and later expand to up to 14 without changing the unit, simply by upgrading the software and hardware. Data and charts can be exported as tables and images for reporting.

Early warnings

When a measurement goes outside the expected range, the unit instantly sends an email alert. The person in charge can view the unit and its data remotely and check what is happening without travelling unless necessary.

Download the TEROCA units data sheet (PDF)

VIEW CATALOGUE